.11.18中英轮机员面试材料由刀豆文库小编整理，希望给你工作、学习、生活带来方便，猜你可能喜欢“轮机部船员面试问题”。
2010.8.18中英面试题
E/O题
1、have you ever served AUTO-0 ship？
2、What action do you take for system insulation fail？
3、How to measure the system insulation？
4、What action do you take when the motor is fail insulation？
5、How to start the emergency generator in sailing？
6、How to maintenance the generator？
7、How many kinds of alarm are there in the FO settle tank？
8、How to test？
9、How long have you work at sea?
10、Have you ever served in the new ship?
11、Have you ever served in the AUTO-0 ship？
4/E1、What are your duties for 4/E？
2、How many kinks of pump in engine room？
3、How to overhaul the reciprocating pump？
4、How many part of a centrifugal pump？
5、What′s it happen if the mouth ring of centrifugal pump is more large？
6、How to start centrifugal pump？
7、How to start screw pump？
8、What action do you take whenM/E exhaust temperature find too high on your watching in the engine
room？
3/E1、What are your duties for 3/E？
2、What kinds of auxiliary engine in your sailing ship？
3、How to overhaul the piston？
4、How to bunkering fuel oil？
5、How to take a oil sample when you are bunkering fuel oil？
6、What′s safety measure should you takewhen you are bunkering fuel oil？
7、What measure should you take if your ship over flow to find for bunkering fuel oil.8、How work for the purifier？How to dismantle purifier？
9、How to repair the purifier when it is leaking out fuel oil？
10、How to start the purifier？
11、What do you know that the purifier′s rate have reached the rated speed？
12、What is procedure to purify the fuel oil？
13、Have you inspected the oily water separator？
14、Have you checked the heater of oily water separator？how to do？
15、How to check the heater when it is heating with eletricity or steam？
16、How to check the discharge oil valve when it is leaking？
17、How to measure the crankshaft deflection of A/E？
18、What measure do you take when you are bunkering at singapore？
19、What measure do you take when bunkering over flow fuel oil on deck？
20、How to maintenance the A/E?
21、How many emergence machines in the engine room?
22、How to adjust the clearance of A/E?
2/E1、what are your duties for 2/E？
2、How to arrange working for them in engine room every day？
3、How many peoples do you want to renew a 65A sea water pipe？
4、what should you do to ensure safety in the workroom？
5、What should you do to ensure safety for repairing fuel valve?
6、How to ensure the in-out valve is closed without leaking?
7、The pipe can′t dismount until the pipe have been cooling.8、What action do you take when receiving the AMVER PSC?
9、What kind of extinguisher is used in E/R’s fixed fire system?
10、What will you do to control engine room fire? And what is the step?
11、Have you have open and check the oily water separator？how to do it？
C/E1、What company have you serve ？
2、What are your duties for C/E？
3、From a port to other port, What are your duties？
4、How many bottle of fuel oil sample do you take in your bunkering？
5、What is difference between B&W and SULZER？
6、Have you have overhaul the M/E turbocharger？
7、Why do you repair the auxiliary engine turbocharger ？
8、What model of M/E turbocharger is in your ship ？
9、what action should you take ,when you find oil is leaking from the trail shaft tube？
10、How many seal ring are there in after seal ？
11、Have you renew the cylinder in your sailing ship？
12、What will you check if your ship in the drydock？
13、Have you work with crane in your sailing ship ？
14、Show the sketch M/E exhaust temperature 330℃ 340℃ 260℃ 300℃ 240℃ 350℃
How do you do？
How to check the fuel valve one to one？
15、How many MARPOL Ⅵ have you know？
16、Do you know technic record？
17、How to ensure the oily water separator and its system all in good conditions?
18、How to manage the bilge water in engine room？
19、How to maintain the oily water separator？
20、When you find oil in the discharge pipe on the next day you sign on, what action should you take?
21、Have you have dismount M/E bearing? for example crohead bearing.22、How to dismount and check the crohead bearing?
23、What is function for the air drive valve of B&W engine?
24、What item to be check for DNB?
25、How to check the F.O.is over used everyday?
26、How to safety working in E/R?
27、Have you have any experience of drydock?
28、What do you do if you find some oil leakage in E/R at sea?
29、How many MAPOL Ⅵ have you know?
30、How to check the OWS?
31、How to test the alarm of OWS?
Questions for C/E:
1、Are you married?
2、Howmany children do you have?
3、Where are you from?
4、Where did you graduate?
5、Which company did you work for?
6、What kind of ship did you sailing on?
7、Howlonghave you work as C/E?
8、Do you know the responsibilities of C/E?
9、How did you deal with spares and stores?
10、How many years have you sailed?
11、Any big problems in these years onboard?
12、What's the reason of these problems?
13、How should you do if somebody call you that NO.3 unit exhaust temperature too high in night time
watch? How do you know the reason?
14、How often do you change the Exhaust valve?
15、How to change the exhaust valve?
16、How much load on your engine normally?
17、What precaution you should take when some of the piston rings are new?
18、Suppose that 3/E come to tell you that G/E can't work well, how should you do?
19.20、How do you know when should change the fuel valve?
21、What is the most important of the purifier?
22、How often do you clean your purifier?
23、What is the most important when somebody overhaul purifier?
24、Do you know there are some small holes for water in a purifier?
25、For C/E ,which machineries are most important?
26、For safety, what is most important?
27、What alarm is most important and urgent for engine?
28、If some problems come, how do you solve these problems?
29、Suppose there is a problem you can't solve, what should you do ?
30、How often you should report to company?
31、Do you know how to calculate fuel oil or lub.oil when bunkering?
32、What should you do if the 4/E is no good?
33、Suppose that 2/E come to you to complain about too much work ,what should you do ?
34、Suppose you are the ship owner, and the C/E and captain fight, how should you do?
35、How should you do when 2/E,3/E,4/E and E/E all come to tell you at the same time that they have some
problems they can't solve, what should you do ?
36、Did you experience PSC inspection? How should you do ?
37、What should you do if captain call you that PSCO onboard when you are in your room?
38、When you come to control room and watch keeping engineer and oilers all are sitting, how should you
do?
39、Do you go to E/R everyday? Do you often talk to other Engineers?
40、When the ship in port, and works are done, will you go ashore? why?
41、Suppose in the manoeuvring operation, if one of your G/E if already breakdown, and then the alarm
of the working G/E alarm activated, how should you do ?Will you tell your captain?
42、Suppose there is a leakage in the bilge pipe, what should you do? And if fitter come to tell you
that he can weld it on the spot, will you allow him to do so?
43、Is this the first time you work for Anglo-Eastern?
44、Do you know the company manuals ?
45、Do you know what is checklist?
46、Do you know SECA?(sulpher emiion control area)And what is the requirement of emiion of sulpher
in SECA?
47、Do you know EU? And what is the requirement of emiion of sulpher in EU port?
48、Do you know MARPOL? What's it for?
49、Did you use the incinerator?
50、How many bottles of sample you need to take when bunkering?
51、How much ppm you need for your oily water separator?
52、Where you can discharge bilge?
53、How to correct items in the oil record book?
54、Do you know IOPP? What's it for? What's it stand for?
55、What kind of maintenance did you carry out on you oily water separator?
56、Which alarm you should check on boiler and incinerator?
57、What should you check if you are cleaning the scavenging space?
58、How to check cylinder liner?
59、Do you know refrigeration system?
60、Do you change the sump oil? How often?
61、How about your computer skill?
62、Do you know PMS?
63、Do you know CMS?
64、Do you have some questions to ask me?
65、Suppose there are some problems in a new machine, will you try to repair it?
Questions for E/E:
2、I know from your resume that you just work 6 months onboard your last ship, why?
3、Did you study in university? And what's your major?
4、Do you know insulation? How to measure?
5、Suppose NO.1 main lub.oil pump motor can't start, how to measure it's insulation?
6、If our ship have low insulation alarm, how should you do ?
7、If the jacket water pump is fail, how to check?
8、Is there any problems you meet on the ships you served?
9、Before you work, did you hang the tag or sign?
10、Did you throw your plastic cup overboard?
11、what is your duties?
12、How to check the insulation of Generator?
13、Before checking of the insulation of Generator, what precautions should you take?
Questions for 3/E:
1、Are you married?
2、How many wives?
3、How many children do you have? And how old are they?
4、Where are you graduated from?
5、Is your university good?
6、Why did you sign off from ship?
7、In your resume, you said you work 4 years in shipyard, do you like the job in shipyard ?
8、Why did you leave shipyard?
9、What's your responsibilities as a 3/E?
10、What did you do on G/E and incinerator? Write them down11、How to overhaul G/E?
12、What are the special tools you need to overhaul G/E?
13、Describeme the sequence of overhauling a G/E.14、What kind of measure you should do after G/E overhauled?
15、Do you know oily water separator? How much ppm you need to keep?
16、Can I pump out water(which contained le than 15ppm oil)in port?
17、Do you know incinerator?
18、How to measure the tappet clearance?
19、Tell me about the alarms on G/E.Questions for 3/E:
1、Are you married?
2、How many wives?
3、How many children do you have? And how old are they?
4、Where are you graduated from?
5、Is your university good?
6、Why did you sign off from ship?
7、In your resume, you said you work 4 years in shipyard, do you like the job in shipyard ?
8、Why did you leave shipyard?
9、What's your responsibilities as a 3/E?
10、What did you do on G/E and incinerator? Write them down11、How to overhaul G/E?
12、What are the special tools you need to overhaul G/E?
13、Describeme the sequence of overhauling a G/E.14、What kind of measure you should do after G/E overhauled?
15、Do you know oily water separator? How much ppm you need to keep?
16、Can I pump out water(which contained le than 15ppm oil)in port?
17、Do you know incinerator?
18、How to measure the tappet clearance?
19、Tell me about the alarms on G/E.Questions for 3/E:
1、Are you married?
2、How many wives?
3、How many children do you have? And how old are they?
4、Where are you graduated from?
5、Is your university good?
6、Why did you sign off from ship?
7、In your resume, you said you work 4 years in shipyard, do you like the job in shipyard ?
8、Why did you leave shipyard?
9、What's your responsibilities as a 3/E?
10、What did you do on G/E and incinerator? Write them down11、How to overhaul G/E?
12、What are the special tools you need to overhaul G/E?
13、Describeme the sequence of overhauling a G/E.14、What kind of measure you should do after G/E overhauled?
15、Do you know oily water separator? How much ppm you need to keep?
16、Can I pump out water(which contained le than 15ppm oil)in port?
17、Do you know incinerator?
18、How to measure the tappet clearance?
19、Tell me about the alarms on G/E.Questions for 4/E:
1、How old are you ?
2、Are you married? Do you have any children?
3、Which university did you graduate from?
4、Do you want to be 4/E ?
5、What is the responsibilities of 4/E?
6、Which machine do you like most in the E/R?
7、What is purifier use for?
8、What's the reason of slow running of purifier?
9、Why there is no oil discharge from the purifier after start it ?
10、What precaution should take when you need welding?
11、When you are on watch ,what you should do with the high exhaust temperature alarm?
12、What you should do when there are smoking in the E/R?
13、What the incinerator use for?
14、What's the reason of purifier overflow ?
15、Do you know gravity disc? What is it for?
16、What will happen if the gravity disc too small?
17、Before youoverhaul purifier ,what should you do?
18、After purifier has been overhauled, what should we check?
19、What is ISM and ISPS ?
20、Do you know air compreor? How many alarms on it? What are they?
21、How many alarms on purifier?
22、How many v/v in air compreor? How often do you clean it?
23、Did you have any accident onboard ship?
24、Can I pump out water treated by oily water separator in port?
25、If you can't pump out ballast water, what may be the reason?
26、Do you know sewage plant? What is it for?
27、Can we discharge sewage in port?
