家电产品中英文缺陷描述整理由刀豆文库小编整理，希望给你工作、学习、生活带来方便，猜你可能喜欢“产品中英文缺陷描述”。
家电产品通用缺陷整理
包装缺陷：
包装箱、装箱带：
产品堆放户外，部分纸箱渗水
Some cartons of products piled outdoors are in the case of water seepage 包裝方式错误
Incorrect packing method / Different packing from approved sample 包装材料脏污、褶皱或破损
Packing material with dirt, wrinkle and damage 金属带用于包装
Metal strapping is used for packing as the sharp edges are harmful to man 纸箱/彩箱 破損/撕裂
The carton/color box is broken or split 包装严重/轻微变形，且对产品造成/未造成损伤
Serious/light deforming of packing with/without damage to product 外箱封箱纸松动 Carton glue tape looses 封箱不良, 箱盖開口
Poorly sealing with the cover opening 包装箱实际尺寸与规格书不符
The sizes of carton are different from spec 包装箱上重要信息遗漏、错误或者不清晰，诸如贴纸格式、产品型号、logo、包装箱尺寸、重量、原产地、批次等
Miing, wrong or illegible of important information on packing such as the form of labeling, model #,logo, size of carton, weight, country of origin，batch etc 包装箱内产品倒装
The packing for product is upside-down 彩箱褶皱
Color box crumples 彩盒封口脱开
Breaking of the joint on gift box 包装箱内漏装泡沫或纸托
Miing foam or paper holder for product protecting in the packing 彩箱内少配件
Miing acceories in the packing 生产批次号：
包装内没有生产批次号
Miing production patch number sealed in the packing 包装内生产批号不清晰
Seal/label of production patch number in the packing is not clear to read 说明书、执行标准、对应单： 产品漏装说明书
Miing production specification 产品说明书皱折/破损
The product specification is folded/damaged 包装内说明书与产品不一致
Specification does not cover the product in the packing 执行标准错误
Instruction sheet is wrong 执行标准缺失
Miing the instruction sheet 包装箱内对应单错误
Corresponding sheet of specification in the packing is wrong
外观：
产品材料/尺寸/颜色/logo/外观与样板有差异 Material/size/color/logo/appearance of product is different from approved sample 警告标贴粘贴不良： 警告标贴有破损
The warning label is damaged 产品缺少警告标贴
Miing the warning label 产品警告标贴翘边
Warning label with flapping edge/lifting 警告标贴脱落
Warning label with peeling off 警告标贴脏污
Warning label is dirty 警示语/安全手册遗漏
Miing caution/warning/safety instruction 产品合格证粘贴不良： 产品合格证贴偏
Certificate of conformity of product is slanting 产品合格证有破损
Certificate of conformity is damaged 产品缺少产品合格证
Miing the certificate of conformity 产品合格证翘边
Certificate of conformity with flapping edge/lifting 产品合格证褶皱
Certificate of conformity is folded 产品合格证脱落
Certificate of conformity with peeling off 产品合格证脏污 Certificate of conformity is dirty 产品合格证上的制造商名称与铭牌不一致
Name of manufacturer on certificate of conformity does not accord with the nameplate 产品铭牌粘贴不良： 产品铭牌贴纸有明显气泡
There are obvious bubbles on the nameplate of product 产品上有重复粘贴的铭牌
There are repeated stickup nameplates on the product 铭牌缺失
Miing nameplate 铭牌翘边
Nameplate with flapping edge/lifting 铭牌褶皱
Nameplate is folded 铭牌粘贴与指定位置有明显偏差
Nameplate is slight out of the designated position 铭牌颠倒
Nameplate is upside-down 铭牌脏污
Nameplate is dirty 能效标签粘贴不良： 能效标签缺失
Miing the Energy Rating Label 能效标签破损/脏污/褶皱/翘边/颠倒
Energy Rating Label is damaged/dirty/folded/lifting/upside-down 条形码：
条形码信息与铭牌/说明书信息不符
Bar code Scanned number is not conform to the number printed on the label/spec 条形码区域破损导致不可读
Broken or tear damage of the bar cord area occurs the un-reading 印刷、喷油不良： 喷油擦花
Paint with abrading 印刷不清晰，不可读
Un-clear printing could not be read 印刷脏污/褪色
Printing is smeared/off colored 丝印不良： 丝印刮花
Scratch on silk-screen 丝印不清
The silk-screen is not clear to read 丝印内容有误
The content of silk-screen is wrong 外部螺钉： 螺丝生锈
Screw with rusting 螺丝打花
Screw with stripping 螺丝断 Screw broken 螺钉翘起
Uneven screw covers 螺孔刮花
Scratch on screw hole 螺丝未锁紧 Screw isn't locked tightly 固定螺柱断裂
The bolt fixing the shell of product is broken 漏装一颗固定螺钉
Mi a screw for fixing the shell 铆钉未完全翻边
The rivet isn't rolled properly and tightly 漏打特殊螺钉
Miing the special screw 产品表面： 外壳/附件破碎
Enclosure or parts is broken 产品装配错位
Aembly with dislocation 产品微晶板错位
The microcrystalline panel is dislocated 产品表面变形
The surface of product deforms 产品表面有凹痕，凹痕尺寸为** There is dent mark on the surface of product shell，the mark is between * to * square cm/mm.产品表面有刮花，划痕尺寸为** There is scratched mark on the surface of product shell , the length is ** cm/mm.产品表面有脏污，脏污点尺寸为** There is dirt mark on the surface of product shell , the spot is over ** square cm/mm 产品表面有污垢，可擦掉的/不可擦掉的There is dirt on the surface of product shell, which is removable / irremovable 产品金属表面生锈
There is corrosion mark on metal surface of product 产品表面有溢胶
There is glue water mark on the surface of product 产品微晶板侧面崩缺
The side face of microcrystalline panel is collapsed 微晶板破损
Microcrystalline panel is broken 产品微晶板溢胶
There is uncleaned glue water mark in the gap of microcrystalline panel 产品塑料部分（如手柄）成型不良 There is peeling of chrome plating 发热盘涂层表面划花
There is scratch mark on the painting surface of heating plate 产品内胆有污垢
There is dirt mark on the internal bladder of product 陶瓷表面有针眼
There are pin holes on the surface of ceramic 制陶不良，表面有凹线
Ceramics is poor that there is concave line on the surface of product 产品表面掉漆
The painting on the surface of product peels off 产品表面涂料不均匀
The surface coating of product is uneven 产品表面油漆涂层起浮点
There are floating points on the surface of paint coating 锅柄焊接不良
The handle of pot is poor welding 产品塑料部分有披锋/毛刺
There is flashing/burrs mark on the plastic parts of product 产品手柄部分有锐边
Plastic part（handle）of product is poorly molded 产品焊接锐边
Welding--sharp edge of xproduct may cause injury 锅盖塑料部分有毛边
The plastic part of pot cover has burrs 水壶基座有毛刺
There are burrs on the base of product 产品底部螺丝有锐边
There are sharp edges of screws on the bottom of product
产品结构缺陷：
部件组装不正确 Parts of the product have not been aembled correctly 间隙问题：
产品金属件与塑料件间隙大于1.0 mm The gap between metal and plastic parts is over 1.0 mm 外壳装配不到位，间隙达到2mm Enclosure is not secured in place or with exceive gaps 2.0 mm 手柄间隙为0.76mm The gap of handle is 0.76mm 机头外壳尺寸偏大，机头外壳与机架耦合处突出0.8～1.3mm The size of shell is so large to nose that the prominent coupling between the shell and the rack is 0.8-1.3mm 产品面盖与顶板配合间隙大于0.8mm The gap between the panel and the roof is greater than 0.8mm 底部塑料与温控器配合间隙为0.8mm The gap between the plastic part of bottom and thermostat is 0.8mm 产品底部与壶身配合间隙为0.5mm The gap between bottom and body of product is 0.5mm 安装不到位、部件松脱： 部件未装紧或引起脱落
Parts aembled are so loose that may cause drop off 部件不定位
Parts aembled cannot hold position 产品金属外部镀铬层剥落
There is sharp edge on the handle of product 虚焊、脱焊、焊穿或者焊接点过小可能影响使用功能
Welding--false welding，mesh welding loose，welding through parts or welding joint is too minor which may affect function 锁紧装置过松或者过紧
The latch mechanism is too tight to operate or too loose to be locked 脚垫装配过松导致脱落
The rubber foot is too loose with falling off 橡胶垫松脱
Rubber feet looses out 电水壶底座与壶体离拉/错位
For electric kettle，there is gap/step between base and bottom 控制面板、开关： 产品控制面板保护膜起皱
Protective membrane covering onto Control Panel is folded 按键卡住
Key/button is jammed/stuck 按键太紧
Key/button is too tight when preing 开关不能复位
Switch could not reset 开关接触不良
Power switch interrupted 保温开关灵敏度低
The sensitivity of insulation switch is poor 控制面板上字体印刷不良 Poor printing on control panel 控制面板刮花
Scratch on the control panel 控制面板尺寸与规格书要求不符
The height of control panel is different from the technical requirement, height of control panel is 120mm, and the technical requirement is 130.5mm 控制面板上的按钮用20～30N的力可以拔出
The buttons on control panel would be pulled out with forces 20N 胶脚、支架： 支架倾斜超过要求
The legs slant outwards/inwards more than requested 胶脚不平
Rocking on rubber foot 漏装胶脚
Miing rubber foot 胶脚松脱
Rubber foot looses 附件、元件： 漏装附件
Miing components 产品发热元件与零部件清单上不一致
The heating elements of product do not accord with S pare Parts list 电源线型号没有报备
Style of supply cord do not accord with submitted 插头生锈 Plug pins is rusted/oxidized 电源线脏污
There is dirt mark on power supply cord 电源线损坏，绝缘层/导线外漏
Mains cable is damaged so as to 2nd insulation layer and/or conductors exposes 电源线夹紧装置松脱
Clamping device for power cord looses 火线外漏 Live wire exposed 电源线可触及
The power cord could be touched from the outside 过滤网损坏
Damaged filter screen 内胆刮花
Scratch on the internal bladder 产品配件炒锅中缺少手柄
There is lack of handle to wok which belongs to the product acceories 产品使用的电源线制造商为**，CB报告中没有覆盖。
The power cord applied is manufactured by **, which does not comply with the CB report.内部结构： 产品内部线路混乱
Internal connection wires disheveled 产品内部电线护套有破损
The sheathing material for internal wire is damaged 产品内部脏污
Dirty mark on the interior of the product 内部金属异物 Metallic residue inside unit which can cause poible risk of electric shock 产品内部有塑胶/金属异物
There is plastic/metal foreign body inside the product 产品内部接线端子处无电源中性线“N”及接地符号“标准中的第7.8章要求
There are no power neutral ‘N’and grounding symbol ‘
’, which do
”标识，不符合GB4706.1not comply to the requirements in the sections 7 and 8 of standard GB4706.1 产品电源线中性线“N”标识粘贴位置错误，不符合标准GB4706.1要求 The position Power neutral ‘N’is posted on does not comply to the requirements of standard GB4706.1 产品内部关键元件无报备，如
The critical components inside the product is not submitted in Parts List，such as
相关测试：
实验设备无校准记录
The equipment for testing is without calibration data at site.工厂无检具，此项试验无法进行
The test is cancelled due to no suitable checking fixture in the factory.因工厂无仪器，能耗测试无法进行
No instrument was supplied for power consumption check 关键元器件对照
Critical Components Marking Comparison 此项试验不适用
The test does not apply 纸箱不能通过边压测试，耐破度不合格
The board could not pa the Edgewise Crush Resistance test，so its Mullen test is failure 跌落测试后，包装出现破洞、撕裂或者缺口，产品明显受损
After Carton Drop test, the packaging appears holes, tears, or openings, 跌落测试后产品受损
After Carton Drop test, the product is obviously damaged 产品跌落测试后锅柄断裂
Panhandle is broken after Carton Drop test 彩盒跌落测试汤锅手柄脱焊
The handle of pot is sealing-off after Carton Drop test 功能缺陷
During the Functional check , there is something functional problems of the product 功能指示器损坏
Function indicators is damaged 指示灯不亮
Indicator lamp on switch could not lit up 指示灯不亮、颜色暗淡或错误
Indicator light is inoperative, dimmed, or in wrong colors 按钮开关或产品功能间歇
Pushbutton switch or unit function is intermittent 间歇无功能
Intermittently non-function 风扇不工作 Fan can not rotate 把手运作不顺畅
The handle can't work well 条形码读取失败
UPC can not be read/Bar Code Readability Check failed 3M胶纸及耐磨实验不合格 3m glue tape test and Rubbing test for all screen printing failed 手柄拉力测试不合格
pull test for handle failed 插片与端子连接处只能承应**Kg的拉力
The joint between the insert and the terminal connection could only bear 电源线拉力测试不合格
Power cord strain relief check failed 电源线弯折测试不合格
Bending test of connection wire failed 电流/功率不合规格
Current or wattage is out of specification 安全测试： 高压测试不合格 Hi-pot test failed 接地电阻测试不合格
Grounding continuity test failed 泄露电流测试不合格 Leakage current test failed 功率偏高 Power out** is upper than limited ** 功率偏低 Power out** is lower than limited ** 功率消耗/工作电压超限
Power consumption** & operating voltage** is out of the limited** 数小时工作后产品过热
overheating after running for hours 可靠性测试不合格 Reliability test failed 灯座极性测试不合格
Polarity Check on Lamp holder failed 开关极性检查不合格 Polarity Check on Switch 通电检查不合格 Power on Check failed 螺钉扭力测试不合格
Screw strength torque test failed 內部检查不合格
Internal construction test failed that „ 爬电距离和电气间隙测试不合格
There is not adequate electric clearance and creep distance
冲击测试不合格 Impact test failed 产品外壳通风口冲击测试破裂
The part of air-vent on the shell of product is broken after Impact test 塞规测试不合格
Go Gage test failed that the gap is **，beyond the requested ** 彩盒剥离时少于**%的粘合面被破坏
There is le than **% of the bonding surface is destroyed when stripping of color box 外箱排钉距离＞**cm Carton nail row distance is greater than **cm the tension **kg 产品毛重低于**kg Gro weight is under **kg 产品包装上无重量标示，以上测量数据仅供参考
There is no weight mark on the packaging of product , so the measurement data above is only for reference
