耐火材料的ISO由刀豆文库小编整理，希望给你工作、学习、生活带来方便，猜你可能喜欢“iso整套”。
ISO耐火材料国际标准
1.ISO 528:1983 Refractory products－Determination of pyrometric cone equivalent(refractorine)耐火制品——耐火度的测定 2.ISO 836：2001 Terminology for refractories 耐火材料术语
3.ISO 1146：1988 Pyrometric reference cones for laboratory use－Specification 实验室用标准测温锥——技术条件
4.ISO 1893:1989 Refractory products－Determination of refractorine under load(differential-with rising temperature)耐火制品——荷重软化温度的测定（示差—升温法）
5.ISO 1927:1984 Prepared unshaped refractory materials(dense and insulating)－ Claification 不定形耐火材料（致密和隔热）——分类
6.ISO 2245:1990 Shaped insulating refractory products－Claification 定形隔热耐火制品——分类
7.ISO 2477:1987 Shaped insulating refractory products－Determination of permanent change in dimensions on heating 定形隔热耐火制品——加热永久线变化的测定
8.ISO 2478:1987 Dense shaped refractory products－Determination of permanent change in dimensions on heating 致密定形耐火制品——加热永久线变化的测定
9.ISO 3187:1989 Refractory products－Determination of creep in compreion 耐火制品——压蠕变的测定
10.ISO 5013:1985 Refractory products－Determination of modulus of rupture at elevated temperatures 耐火制品——高温抗折强度的测定
11.ISO 5014:1997 Dense and insulating shaped refractory products－Determination of modulus of rupture at ambient temperature 致密和隔热耐火制品——常温抗折强度的测定
12.ISO 5016:1997 Shaped insulating refractory products－Determination of bulk density and true porosity 定形隔热耐火制品——体积密度和真气孔率的测定
13.ISO 5017:1998 Dense shaped refractory products－Determination of bulk density, apparent porosity and true porosity 致密定形耐火制品——体积密度、显气孔率和真气孔率的测定
14.ISO 5018:1983 Refractory materials－Determination of true density 耐火材料——真密度的测定
15.ISO 5019-1:1984 Refractory bricks－Dimensions－Part 1: Rectangular bricks 耐火砖——尺寸 第一部分：直形砖 16.ISO 5019-2:1984 Refractory bricks－Dimensions－Part 2: Arch bricks 耐火砖——尺寸 第二部分：楔形砖
17.ISO 5019-3:1984 Refractory bricks－Dimensions－Part 3: Rectangular checker bricks for regenerative furnaces 耐火砖——尺寸 第三部分：蓄热室用直形格子砖
18.ISO 5019-4:1988 Refractory bricks－Dimensions－Part 4: Dome bricks for electric arc furnace roofs 耐火砖——尺寸 第四部分：电弧炉炉顶用球顶砖
19.ISO 5019-5:1984 Refractory bricks－Dimensions－Part 5: Skewbacks 耐火砖——尺寸 第五部分：拱脚砖
20.ISO 5019-6:1984 Refractory bricks－Dimensions－Part 6: Basic bricks for oxygen steel-making converters 耐火砖——尺寸 第六部分：氧气炼钢转炉用碱性砖
21.ISO 5022:1979 Shaped refractory products－Sampling and acceptance testing 定形耐火制品——抽样及验收检验 22.ISO 5417:1986 Refractory bricks for use in rotary kilns－Dimensions 回转窑用耐火砖——尺寸
23.ISO 8656-1:1988 Refractory products－Sampling of raw materials and unshaped products--Part 1: Sampling scheme 耐火制品——耐火原料和不定形耐火材料抽样 第一部分：抽样方案
24.ISO 8840:1987 Refractory materials－Determination of bulk density of granular materials(grain density)耐火材料——颗粒材料体积密度（颗粒密度）的测定
25.ISO 8841:1991 Dense, shaped refractory products－Determination of permeability to gases 致密定形耐火制品——透气度的测定 26.ISO 8890:1988 Dense shaped refractory products－Determination of resistance to sulfuric acid 致密定形耐火制品——抗硫酸侵蚀性的测定
27.ISO 8894-1:1987 Refractory materials－Determination of thermal conductivity－Part 1: Hot-wire method(cro-array)耐火材料——导热系数的测定 第一部分：十字线法 28.ISO 8894-2:1990 Refractory materials－Determination of thermal conductivity －Part 2: Hot-wire method(parallel)耐火材料——导热系数的测定 第二部分：平行线法
29.ISO 8895:1986 Shaped insulating refractory products－Determination of cold crushing strength 定形隔热耐火制品——常温耐压强度的测定
30.ISO 9205:1988 Refractory bricks for use in rotary kilns－Hot-face identification marking 回转窑用耐火砖——热面标记 31.ISO 10058:1992 Magnesites and dolomites－Chemical analysis 菱镁矿和白云石——化学分析方法
32.ISO 10059-1:1992 Dense, shaped refractory products－Determination of cold compreive strength－Part 1: Referee test without packing 致密定形耐火制品——常温耐压强度的测定 第一部分：无衬垫仲裁法
33.ISO 10059-2:2003 Dense, shaped refractory products－Determination of cold compreive strength－Part 2: Test with packing致密定形耐火制品——常温耐压强度的测定 第二部分：衬垫法
34.ISO 10060:1993 Dense, shaped refractory products－Test methods for products containing carbon 致密定形耐火制品——含碳制品的试验方法
35.ISO 10080:1990 Refractory products－Claification of dense, shaped acid-resisting products 耐火制品——致密定形耐酸制品的分类
36.ISO 10081-1:2003 Claification of dense shaped refractory products－Part 1:Alumina-silica 致密定形耐火制品的分类 第一部分：铝硅耐火材料
37.ISO 10081-2:2003 Claification of dense shaped refractory products－Part 2: Basic products containing le than 7 % residual carbon致密定形耐火制品的分类 第二部分：残炭量小于7%的碱性耐火制品
38.ISO 10081-3:2003 Claification of dense shaped refractory products－Part 3: Basic products containing from 7% to 50% residual carbon致密定形耐火制品的分类 第三部分：残炭量7%～50%的碱性耐火制品
39.ISO 10635:1999 Refractory products－Methods of test for ceramic fibre products 耐火制品——陶瓷纤维制品试验方法 40.ISO 12676:2000 Refractory products－Determination of resistance to carbon monoxide 耐火制品——抗一氧化碳性能的测定 41.ISO 12677:2003 Chemical analysis of refractory products by XRF-Fused cast bead method 耐火制品X-射线荧光化学分析（玻璃样片法）
42.ISO 12678-1:1996 Refractory products－Measurement of dimensions and external defects of refractory bricks－Part 1: Dimensions and conformity to drawings 耐火制品——耐火砖尺寸和外观缺陷的检验 第一部分：实际尺寸与设计图纸尺寸的一致性 43.ISO 12678-2:1996 Refractory products－Measurement of dimensions and external defects of refractory bricks－Part 2: Corner and edge defects and other surface imperfections 耐火制品——耐火砖尺寸和外观缺陷的检验 第二部分：边角缺陷及其他表面缺陷 44.ISO 13765-1:2004 Refractory mortars－Part 1: Determination of consistency using the penetrating cone method 耐火泥浆 第一部分：用针入度法测定稠度
45.ISO 13765-2:2004 Refractory mortars－Part 2: Determination of consistency using the reciprocating flow table method 耐火泥浆 第二部分：用流动法测定稠度
46.ISO 13765-3:2004 Refractory mortars－Part 3: Determination of joint stability 耐火泥浆 第三部分：粘结稳定性（粘结时间）的测定
47.ISO 13765-4:2004 Refractory mortars－Part 4: Determination of flexural bonding strength 耐火泥浆 第四部分：抗折粘结强度的测定
48.ISO 13765-5:2004 Refractory mortars－Part 5: Determination of grain size distribution(sieve analysis)耐火泥浆 第五部分：粒度分布（筛分析）的测定
49.ISO 13765-6:2004 Refractory mortars－Part 6: Determination of moisture content of ready-mixed mortars耐火泥浆 第五部分：湿态成品泥浆水分含量的测定
